Note that these instructions are based on our in-house testing. You should also explore the handling sheet, and conduct your own testing with fragrance loads, colouring and temperatures (download the complimentary testing sheet). We recommend a 3-5% fragrance load using our fragrance range. We advise using a digital thermometer to measure the correct temperature of the wax.

• Preparation: Lay down some newspaper because pouring candles can be messy. Ensure that you work on a sturdy surface and that your candle wicks are firmly in place. Mark the maximum fill line with a non-permanent marker to ensure that the jars are not overfilled.

• Step 1 – Melting

  Wax should be melted in a bain-marie and should not be exposed to direct heat.

  Melt your wax slowly to reach between 90-95℃. The wax should appear completely translucent. Although this is a forgiving wax, take care not to heat it over 100℃ as this can influence the setting and performance of the wax.

• Step 2 – Adding Colour and Fragrance

  Add fragrance between 85℃ and 90℃ and stir gently for a minute. Note that if using only paraffin wax as a single wax candle, we recommend a fragrance load of only 3-5%, depending on the strength of the particular fragrance.

  If adding colour, it’s best to do so before the fragrance to ensure the colour blends well with the wax.

• Step 3 – Pouring

  Once your fragrance and colour have blended, and the wax has cooled down to 75℃, it is ready to be poured. The wax will have a clear appearance.

  Fill the container to 2cm below the maximum filling line to leave room for the top-up. Make sure to keep enough wax for the top-up, depending on the number of candles being made.

  It is essential to have the containers at the same temperature as the ambient room temperature.

• Step 4 – Curing and Topping Up

  Allow wax to cure for 12 hours.

  Using a small bain-marie, warm up the remainder of the wax to between 70℃ and 75℃.

  Top up the final layer of the candle to the maximum fill line of your containers. Allow to set for another 12 hours. The topping layer is always poured cooler than the initial pour.

  With Paraffin wax, you can do up to three pours to ensure container adhesion and to secure your smooth top.

• Prioritise safety by wearing goggles and gloves during product preparation.
  Access the Safety Data
• Sheet (SDS) and step-by-step instructions for comprehensive safety guidelines.
• Exercise caution when working with ANY warmed-up wax product. Use it exclusively within recommended percentages and temperatures for candles.
• Take care to avoid damage to polished, painted, plastic, or leather surfaces when using wax products. Follow instructions diligently.
• Store the product out of reach of children and pets. Individuals with perfume sensitivity should use the product cautiously.
• Always label a candle with a warning label.